Re-modeling of the threads is underway. The whole model is being sized up so that when it is printed, it is more detailed.
Update: Tuesday, December 15th
Threads have been re-modeled, and the size of the model has been increased.
Update: Friday, January 29th
The top module has been printed with the Purement filament and fits perfectly with the bottom two.
Leakages arose surrounding the threads. They will be sealed using a rubber sealant on each horizontal plane around the threads.
Update: Friday, January 29th
The top module has been printed with the Purement filament and fits perfectly with the bottom two.
Leakages arose surrounding the threads. They will be sealed using a rubber sealant on each horizontal plane around the threads.
Update: Monday, February 8th
The previously mentioned leakages surrounding the threads were not able to be sealed by the rubber sealant. A rubber, 3d printed gasket covered in rubber sealant has been developed and will be tested once created.
Update: Wednesday, February 17th
Anti-microbial filter pellets have been printed using the Purement filament and added to our design. Our gasket has also been printed and will be coated in rubber sealant. (not pictured)
Update: Wednesday, February 17th
Anti-microbial filter pellets have been printed using the Purement filament and added to our design. Our gasket has also been printed and will be coated in rubber sealant. (not pictured)
(3d printed pellets)
Update: April 7th
Gaskets added to model to prevent leakages.
Gaskets added to model to prevent leakages.
No comments:
Post a Comment